VADDIO WallView HD1 CCU with HSDS Especificaciones descargar pdf (Pagina 20)

Call 800-572-2011 Toll Free vaddio.com

Vaddio’s Quick-Connect CCU is the ﬁrst camera control unit for Robotic

PTZ cameras, enabling the adjustment of IRIS, GAIN, COLOR and DETAIL

with the turn of a knob.

You can ﬁnally take control of PTZ Camera image output. Match multiple

cameras and make necessary color and shading changes easily. In

addition, there are Scene Store buttons, allowing the user to save speciﬁc

color matched images, such as day and night, lighting changes or multiple

locations.

Tally indicators are located on the front of each Quick-Connect CCU,

allowing the user to obtain a visual indicator of a live camera. Furthermore,

with the Vaddio ClearVIEW HD-18, Panasonic HE100 and Sony BRC

series cameras, the LED tally light built into the camera also illuminates,

providing the on-air talent a visual indicator of which camera is live.

The Quick-Connect CCU’s cabling system allows the integrator to use

standard Cat. 5 cabling to run both HD and SD video (for cameras that

provide simultaneous HD and SD video), camera power, black burst sync

and camera control. Using Vaddio’s High Speed Differential Signaling™

(HSDS) provides for a high bandwidth, low loss video signal to ensure

high deﬁnition quality up to 500 feet (152.4 m).

Individual camera video signal calibration can be achieved by using the

user-controllable Y-Gain potentiometer for adjusting luminance gain over

the entire cable distance – and the 4-Position skew switch to compensate

for signal loss over the cable distance.

The Quick-Connect CCU supports the Vaddio ClearVIEW HD-18, Panasonic

AW-HE100, Sony BRC-H700, BRC-Z700, BRC-Z330 and BRC-300. It also

supports the Sony EVI-HD1, EVI- D70 and the EVI-D100.

The ﬁrst Camera Control Unit for Robotic PTZ Cameras, the Vaddio Quick-Connect CCU

™

enables you to adjust IRIS,

GAIN, COLOR and DETAIL with the turn of a knob. And installation is easy, too. Just use standard Cat. 5 cabling to

run HD/SD video, power, SYNC and camera control up to 500 feet from your control room.

Quick-Connect CCU Systems

WallVIEW CCU HE100

The WallVIEW CCU HE100 is built around the Panasonic AW-HE100 high deﬁnition pan/

tilt/zoom camera, with 3-CCDs and a 13x optical zoom lens. Because the WallVIEW CCU

HE100 operates on 12 Volt DC it easily integrates into projects where no AC outlet is

required at the camera location.

WallVIEW CCU HE100 enables the adjustment of color, gain, pedestal, gamma and iris

functions on the camera with the turn of a knob.

FEAT URE S

• 12 Volt DC Panasonic AW-HE100 High Deﬁnition PTZ

camera and remote

• 3-CCD Image Device

• 13x lens, 720p/1080i (switchable) with simultaneous SD output

• Red and blue gain, detail, chroma, gamma, pedestal,

iris and gain controls

• Video, power and control run over Cat. 5 cabling up to 500 feet

• Heavy-duty wall mount bracket and power supply

Note: Optional Camera Cards — Page 29

WallVIEW CCU HE100

North America

999-6117-000

International

999-6117-001

WallVIEW

™

CCU HD-18

The WallVIEW CCU HD-18 is built around the ClearVIEW HD-18 high deﬁnition pan/tilt/

zoom camera, with a 1/3-inch, 1.3 megapixel CCD imaging sensor, a glass multi-element

wide dynamic zoom lens (18x optical), a tally light and a 1.8-lux rating, providing superior

images in a wide range of high-deﬁnition video applications.

WallVIEW CCU HD-18 enables the adjustment of color, gain, pedestal, gamma, chroma,

knee and iris functions on the camera with the turn of a knob.

FEAT URE S

• 1/3-inch CCD Image Device

• 18x lens, Simultaneous Component HD

(1080p, 1080i or 720p) and SD outputs

• 1.3 Megapixels

• Red and blue gain, detail, pedestal, gamma, chroma,

knee and iris controls

• Heavy-duty wall mount bracket and power supply

WallVIEW CCU HD-18 - Black

North America

999-6907-000

International

999-6907-001

WallVIEW CCU HD-18W - White

North America

999-6907-000W

International

999-6907-001W

WallVIEW CCU HD-18 SDI

The WallVIEW CCU HD-18 SDI is built around the ClearVIEW HD-18 high deﬁnition pan/tilt/

zoom camera, with a 1/3-inch, 1.3 megapixel CCD image sensor, a glass multi-element

wide dynamic zoom lens (18x optical), a tally light and 1.8-lux rating.

The WallVIEW CCU HD-18 SDI is capable of HD-SDI or SDI video outputs, which transmits

3Gb/s single link HD-SDI digital video resolutions up to1080p over a single coax cable.

The Quick-Connect enables adjustment of color, gain, pedestal, gamma, chroma, knee and

iris functions on the camera with the turn of a knob.

F E A T URE S

• 1/3-inch CCD Image Device

• 18x lens

• 1.3 Megapixels - 720p (SMPTE 292M),

1080i (SMPTE 292M), 1080p (SMPTE 424M),

480i (SMPTE 259M) and 576i (SMPTE 259M)

HD-SDI and SD-SDI outputs

• Red and blue gain, detail, pedestal, gamma, chroma, knee

and iris controls

• Heavy-duty wall mount bracket and power supply

WallVIEW CCU HD-18 SDI - Black

North America

999-6908-000

International

999-6908-001

WallVIEW CCU HD-18W SDI - White

North America

999-6908-000W

International

999-6908-001W

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comentarios a estos manuales

Sin comentarios

VADDIO WallView HD1 CCU with HSDS Especificaciones Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad VADDIO WallView HD1 CCU with HSDS