VADDIO WallView HD1 CCU with HSDS Especificaciones descargar pdf (Pagina 13)

Call 800-572-2011 Toll Free vaddio.com

an Automated Content Presentation System

1 Content

Select the content that will be used by the presenter

Whiteboard

Recorded Video (DVD)

Document Camera

Video Conferencing Far End Video

2 Work area

Locate the presenters work areas

Podium

Whiteboard

Teaching Station

Desk/Table

3 Triggers

Select the type of automation triggers to be used

at each work area

PresenterPOD

Floor Mat

Ceiling IR

TouchVIEW Buttons

Note* A PresenterPOD is required if you plan on using more

than one source, or if you want to activate both a camera and

a content source at the same time.

4 Presentation content

Select what content will need to be available at

each workstation (up to two per PresenterPOD)

Podium - i.e. PC & Document Camera

Whiteboard – i.e. Whiteboard & PC

Teaching Desk – Far-end Video, Document Camera

Note* With each PresenterPOD you can automate up to two

content sources and one camera preset. For example, at

the podium you can have a preset showing a close-up of

the presenter and have your content preset be a PC with a

PowerPoint presentation. When the presenter walks up to

the podium the camera zooms in on them and the PC will

display the PowerPoint presentation. Another content source

can be used as well, such as a document camera that can be

switched when needed.

5 Tracking and preset

Is camera tracking between presets required or

is a wide view of the front of the room adequate

when the presenter is not in a work area?

There are two common ways to automate the

presenter camera when the presenter is not in a

work area and not on a camera preset. The ﬁrst

involves setting up a default camera preset that

automatically zooms the camera out to a wide

view of the room so the presenter can be seen

walking between work areas.

The second method uses camera tracking so that

the camera follows the presenter as they walk

between work areas. This has the advantage of

providing a more broadcast quality experience to

the end user.

6 Presenter camera

Select what Presenter Cameras to be used in the

room and what presenter shot is desired at each

workstation.

Main Presenter Camera with presets

Tracking Camera system

Side room cameras

Note* Side room cameras are positioned cameras between

30-45 degrees from the center of the room and allow for

preset camera shots of the presenter walking towards or away

from the camera, where a center facing camera only can only

show a side proﬁle of the presenter.

7 Display

Is a dual monitor or a PIP going to be displayed?

Will you want to show content and a presenter on

the same monitor using PIP or will each source

have its own monitor (typical in videoconferencing

systems)? If you are using a dual monitor

conﬁguration you will have to use two Auto

Presenter’s, setting them up so one AutoPresenter

is assigned to automate the cameras and provide

a discreet video output. The other AutoPresenter

is used for content automation and providing a

discreet video output.

8 Microphone count

Is student camera automation required?

If so, select how many student cameras you

will need to cover the students sitting in the

classroom, then determine the number of

microphones that will be used to pick up the

audio of the students. The microphone count is

important as each microphone will be used as

a camera preset trigger device that is activated

when they use the push-to-talk button on

the microphone. These microphones are then

connected to MicVIEW, which provides a true

microphone switching circuit that provides

constant contact triggers to the AutoPresenter.

This eliminates the erratic switching that occurs

with a lot of microphone mixers that use fast

gating or allow multiple microphones to stay on.

9 Classroom display

Select your classroom displays keeping in mind

that the instructor will need a display in front of

them so they do not have to turn around all the

time and look at the front display.

You have now designed a fully automated content

presentation system. If you need any additional

help with your design please contact our Support

Staff that is available to help with your design

requirements.

Distance Education Example

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comentarios a estos manuales

Sin comentarios

VADDIO WallView HD1 CCU with HSDS Especificaciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad VADDIO WallView HD1 CCU with HSDS