
The EZCamera PTZ series of cameras allows integrators to construct EZCamera systems around specific applications
using Sony and Canon PTZ cameras. EZCamera PTZ kits come with the camera, the Shoe and the IR remote.
The integrator chooses the power supplies, Quick-Connects, wall mounts, and control adapters as required.
EZCamera Systems
The Model 70 PTZ Camera Kit is built around the Sony EVI-D70 PTZ camera and includes
the EZCamera Cable Shoe and IR Remote Commander. The EZCamera Cabling System
allows the installer to use Cat. 5 cabling to run power, video and camera control.
Sony EVI-D70 Standard Definition PTZ Camera
EZCamera Cable System for video, power and control
over Cat. 5 cabling up to 500 feet
Vaddio’s IR Remote Commander
The Model 50iR PTZ Camera Kit is built around the Canon VC-C50iR inverted PTZ camera
and includes the EZCamera Cable Shoe and IR Remote Commander. The EZCamera Cabling
System allows the installer to use Cat. 5 cabling to run power, video and camera control.
Inverted Canon VC-C50iR Standard Definition PTZ Camera
EZCamera Cable System for video, power and control
over Cat. 5 cabling up to 500 feet
Vaddio’s IR Remote Commander
The Model 50i PTZ Camera Kit is built around the Canon VC-C50i PTZ camera and includes
the EZCamera Cable Shoe and IR Remote Commander. The EZCamera Cabling System
allows the installer to use Cat. 5 cabling to run power, video and camera control.
Canon VC-C50i Standard Definition PTZ Camera
EZCamera Cable System for video, power and control
over Cat. 5 cabling up to 500 feet
Vaddio’s IR Remote Commander
The Model 100 PTZ Camera Kit is built around the Sony EVI-D100 PTZ camera and includes
the EZCamera Cable Shoe and IR Remote Commander. The EZCamera Cabling System
allows the installer to use Cat. 5 cabling to run power, video and camera control.
Sony EVI-D100 Standard Definition PTZ Camera
EZCamera Cable System for video, power and control
over Cat. 5 cabling up to 500 feet
Vaddio’s IR Remote Commander
Note for the above Camera Kits:
Model 100 PTZ Camera Kit, Model 70 PTZ Camera Kit, Model 50i PTZ Camera Kit
Integrator must choose a Quick
nect Box and 18VDC or 24VDC PowerRite power supply (depending on length of Cat. 5
cable run) per camera system, or the Quick
nect 4 which is four Quick
nect Boxes, four power supplies, four EZCamera Control Adapters in a 2
rack mountable enclosure.
Integrator must choose a Quick
nect Box and 18VDC or 24VDC PowerRite power supply (depending on length of Cat. 5 cable run) per camera system, or the
Suspended Ceiling Mounting Kit as an accessory for the Model 50iR PTZ. See Vaddio Technical Note 113D for EZCamera Cabling distances.
Comentarios a estos manuales