VADDIO PRODUCTIONView HD-SDI MV Guía de usuario descargar pdf (Pagina 23)

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 23 of 36

Multiviewer

>Select

>On or Off

Note: When activated, you must go to Touch Screen Menu and select either the 22” or 18.5” Vaddio TeleTouch Touch

Screen.

Cam Search Menu

>Select

>All Ports: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

>Port 01: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

>Port 02: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

>Port 03: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

>Port 04: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

>Port 05: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

>Port 06: (select search method – Auto, Sony, Canon, Canon Only IS On, Panasonic Only, No Camera)

NOTE: When using the Panasonic HE-100 cameras, it is required to select Panasonic.

CCU Mode

>Select

>All Ports: (Select method – Direct Cam Ctrl or CCU)

>Port 01: (Select method – Direct Cam Ctrl or CCU)

>Port 02: (Select method – Direct Cam Ctrl or CCU)

>Port 03: (Select method – Direct Cam Ctrl or CCU)

>Port 04: (Select method – Direct Cam Ctrl or CCU)

>Port 05: (Select method – Direct Cam Ctrl or CCU)

>Port 06: (Select method – Direct Cam Ctrl or CCU)

NOTE: When Vaddio Quick-Connect CCUs are used with ProductionVIEW HD-SDI MV, the CCU mode disables Iris

functions, AWB and BLC on the ProductionVIEW HD MV console, allowing the user to control these functions from the

Quick-Connect CCU only.

System Menu

>Select

>Serial Input

>Select

>On or Off

Turns on or off serial input (default is on)

>Serial Echo

>Select

>On or Off

Turns Serial Echo on or off (default is on)

>Serial Info

>Select

>On or Off

Non-supported function. For future engineering use only.

>Panel Lights

>Select

>00 through 50

Panel Light Brightness (all lights - 50 is the brightest) (default is 25, off is 00)

>Clear Memory

>Select

>Start

Clears the camera preset memories and sets all parameters to default settings

>Clear Presets

>Select

>Start

Clears the camera preset memory only

>Power Up Preset

>Select

>Home Camera

>Select - Upon power up, all cameras will go to their home position

>Preset 12

> Select - Upon power up, all cameras will go to Preset 12

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comentarios a estos manuales

Sin comentarios

VADDIO PRODUCTIONView HD-SDI MV Guía de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad VADDIO PRODUCTIONView HD-SDI MV